■
Poisonous vapors can result when thermally cutting painted
components or components made out of composite materials.
− Select a suitable cutting process.
or
− Wear a suitable protective mask and ensure there is a
sufficient supply of fresh air.
■
Secure top-heavy assemblies to prevent them from tipping
over and carefully put them in a good transport position
(center of gravity down).
■
Moving assemblies may be unbraked after being discon-
nected from the power supply.
−
Fix movable assemblies prior to disassembly/transport,
so that the center of gravity cannot move in an uncontrol-
led manner.
■
Mechanical stresses can be released when undoing chains,
ropes and steel constructions!
−
Wear suitable protective gear and close off the area over
a wide area.
■
On defective machines, parts of the hydraulic system and
the compressed air system may still be under pressure!
■
Cordon off transport routes and storage positions extensively.
■
Use suitable lifting gear. See installation conditions.
■
Fasten assemblies above the center of gravity as far as pos-
sible.
1
‐
28
Disassembly and disposal
2019-07-09
B1161en
Remove
Transporting assemblies
