The backgauge can move to the next programmed position at
different times.
Step change
Description
automatic
The backgauge automatically moves to the
next index position at the end of the bending
operation.
The backgauge automatically moves to the
next stop position when the press beam has
moved upwards up to the mute point.
Default setting.
The backgauge automatically moves to the
next stop position when the press beam has
moved upwards up to the upper dead point.
Manually
the press beam moves to the upper dead point
(UDT).The control stops.
The backgauge moves to the next index posi-
tion when START is pressed.
the press beam moves to the upper dead point
(UDT).
The backgauge moves to the next index posi-
tion when the PRESS BEAM DOWN foot
switch is pressed.
Step change
Tab. 1-7
4.2
Safety-relevant signs on the machine
Warning signs draw attention to dangers when operating the
machine.
Fig. 102837
1
‐
16
Measures to be taken by the manufacturer
2019-07-09
B1161en
Processing strategy of the
backgauge
