Using lifting eyes
Personnel:
Crane driver
Protective equipment:
Industrial safety helmet
Protective clothing
Protective gloves
Safety shoes
WARNING!
Danger of death from the fall of AHU casing
units.
If you overload lashing points or lifting gear, the load
may fall down. You or others could be killed.
–
Use lifting eyes only to move AHU casing units
up to a maximum weight of 1500 kg.
–
Use all the lashing points provided.
–
Use only adequate lifting gear and slings.
–
Stand clear of suspended loads.
Fig. 7: Using lifting eyes for moving units with a crane
AHU casing unit maximum weight: 1500 kg
Ⓐ
Moving units with ropes/chains
Ⓑ
Moving units with a spreader beam
①
Lifting eye
②
Slings
1.
Remove the covers from the threaded holes in the
top corners of the AHU casing unit.
2.
Insert all lifting eyes ( Fig. 7 /1) completely into the
threaded holes.
Several lifting eyes are part of the supply
package; if you have used them for moving
other AHU casing units, you can reuse them.
3.
Hook the slings ( Fig. 7 /2) into the lifting eyes.
Note:
Maintain an angle greater than 45° between
the sling and the top of the unit.
Do not spread slings by more than 60°.
Ensure that the slings cannot damage the
AHU casing unit.
Suspend (distribute) the load symmetrically,
i.e. in such a way that its centre of gravity is
beneath the crane hook.
We recommend using a chain hoist and
spreader beam in the following cases:
–
If the correct angles for the slings cannot
be maintained.
–
If there are more than four lashing points
on a package.
4.
Slowly lift the load and start moving.
Transport and storage
Moving packages > Moving packages with a crane
Air handling unit X-CUBE Ex
16
