Setting up and connecting the hydraulic unit
Personnel:
HVAC technician
Protective equipment:
Industrial safety helmet
Hearing protection
Protective clothing
Protective gloves
Safety shoes
Safety harness
WARNING!
Risk of explosion!
The hydraulic unit is not explosion-proof; using it in
areas with potentially explosive atmospheres may
lead to an explosion.
Do not install the hydraulic unit in areas with poten-
tially explosive atmospheres.
Fig. 31: Setting up the hydraulic unit
1.
Install the hydraulic unit so that it is parallel to the
wall and floor.
2.
Alignment of the hydraulic unit
using level-
ling feet
(optional)
- Adjust the feet of the hydraulic
unit so that it is level (use a
19 mm wrench).
without feet
- Level out floor unevenness using
materials provided by others,
e.g. rubber or elastomer sheets.
Installation
Connecting the run around coil system
Air handling unit X-CUBE Ex
39
