E X P L O S I O N P R O O F
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
normal
www.schischek.com
Schischek GmbH Germany, Muehlsteig 45, Gewerbegebiet Sued 5, 90579 Langenzenn, Tel. +49 9101 9081-0, Fax +49 9101 9081-77, E-Mail [email protected]
ExBin-P_en
V02 – 18-Oct-2016
ExBin-P... ExBin-P...-2
Special options
...-CT ...-OCT ...-VA ...-OVA
Menu 6 “mode” – Switching properties
1. Define the device’s normal range first:
The device should indicate (green LED) when the temperature/humidity is
▪
above the setpoints – mode „up-range“ has to be selected.
▪
under the setpoints
– mode „down-range“ has to be selected.
▪
between the setpoints – mode „mid-range“ has to be selected.
This mode is available for 2-stage devices only (...Bin-P...-2).
2. Select the switching charateristic of the output relay:
When the measured value is in normal range, the corresponding relays shall
▪
close – select “normally closed” (nc)
▪
open – select “normally open” (no)
state
state
state
state
state
state
state
state
state
state
state
state
output
switch 2
(optional)
output
switch 2
output
switch 2
(optional)
output
switch 2
(optional)
output
switch 2
(optional)
output
switch 2
output
switch 1
output
switch 1
output
switch 1
output
switch 1
output
switch 1
output
switch 1
green
green
green
green
green
green
green
green
green
green
green
green
red
red
red
red
red
red
red
red
red
red
red
red
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
Hysteresis
„UP range“ – „Normally Closed“ (nc)
Normal range above setpoint – switch is closed
„Mid range“ – „Normally Closed“ (nc)
Normal range between setpoints – switch is closed
„Down range“ – „Normally Closed“ (nc)
Normal range below setpoint – switch is closed
„UP range“ – „Normally Open“ (no)
Normal range above setpoint – switch is open
„Mid range“ – „Normally Open“ (no)
Normal range between setpoints – switch is open
„Down range“ – „Normally Open“ (no)
Normal range below setpoint – switch is open
The switch opens
when the set value
is underrun.
The switch opens
when the set value
is underrun.
The switch closes
when the set value
is underrun.
The switch closes
when the set value
is underrun.
2-stage devices
only
2-stage devices
only
2-stage:
2-stage:
setpoint 1
setpoint 1
setpoint 1
setpoint 1
setpoint 1
setpoint 1
setpoint 2
setpoint 2
setpoint 2
setpoint 2
setpoint 2
setpoint 2
6 / 6
