4x
①
②
④
⑤
③
Fig. 17: Fixing of the top of the device
11.
Align the top of the device with the mounting
base on the side and back. When the correct posi-
tion is reached, the top locks onto the mounting
base. Then screw in the four connecting screws
Insert the plug ( Fig. 17 /4) into the socket
Connect the earthing plug of the mounting base of
the casing and the top of the device.
12.
Reassemble the dismantled components on the
top of the device by carrying out steps 3 to 10 in
reverse order. Do not refit the matching rear frame
to the top of the device (step 2).
Fig. 18: Positioning the device
13.
NOTICE!
Do not push the device over the levelling
feet!
Lift the device slightly with the lift truck so that the
levelling feet are free. Move the device to its final
position, being careful not to tip it over. Lower the
device with care.
14.
Align the device vertically using the levelling feet.
Installation
Installation
Decentralised ventilation units SCHOOLAIR-S-HV
20
