B -
19
Infrared Camera – Operating Manual
EN
07. readInG Out IMaGes
Reading Out Images from the SD Card
You can remove the SD card from your camera and
download the images to your computer via the supplied
SD card reader.
1 . Open the battery / SD
card cover and press
the SD card lightly, then
the SD card will pop-up
automatic.
2 . You can download the IR images directly from SD
card or via SD card reader.
08. COnneCtInG and readInG Out
Charging the Battery via the Docking Station
The rechargeable battery can also be recharged via the
docking station using an optionally available adapter.
1. Attach power adaptor to the power terminal on the
multi-functional dock.
2. Connect the adapter cable to the charger and plug into
the mains socket.
3 . The power LED of the camera blinks while the battery
is charging and lights up green when charging is
complete. Unplug the power adapter. The best
way to recharge the battery is to use the char-
ging station included in the scope of delivery.The IR
camera can also be powered by the mains using the
docking station.This is an extremely useful feature
when the camera is used in continuous operation. Ple-
ase ensure that you only use original Trotec mains
adapters to avoid any damage from occurring to
your camera.
Connecting to a monitor
The camera can be connected to a video-compatible
monitor to view and analyse images via the video cable
included in the scope of delivery .
1. Turn off the IR camera.
2. Connect the video cable
to the video out terminal
of the multi-function
docking station.
3. Plug the other end of
the video cable into the
monitor‘s in jack
4. Turn on the monitor
and the IR camera.
Connecting to a Computer
(only possible with cameras with USB interface or
real-time capability)
Connect the dongle included in the scope of delivery to
a free USB port. The software will not open without the
dongle. Go to “show” => “IR camera model” in the menu
to select the camera type which you would like to connect
to your computer. Connect the USB cable included in the
scope of delivery to the USB port of your computer and the
connection point of your multi-function docking station.
There is no need to switch off either your PC or your ca-
mera while you are setting up this connection. See your
computer handbook or instructions to find out where
the USB port is. The USB port is only used for optionally
available software.