B -
11
Infrared Camera – Operating Manual
EN
3. Setting the Level and
Range.
• Press the left or right
arrow on the omni
selector to select a
field.
• Press the up or down arrow on the omni selector
to set the values.
4. Press the MENU/ENTER key to save the changes or
press the C key to close the window without saving
any new settings.
Image Settings
1. Press the MENU/ENTER key.
2. Press the
s
up or
down
t
arrow on the
omni selector to se-
lect the menu item
Iron, then Press the
MENU/ENTER
key.
Press the
left / right
key to select the desired colour.
Further Settings
1. Press the MENU/ENTER
key and change to the
menu item [System
Setup]. Confirm your
entry.
2. Press the
s
up or
down
t
arrow on
the omni selector un-
til you reach the menu
item [Camera Setup]
and press the MENU/
ENTER key.
3. Selecting image settings.
• Press the
s
up or down
t
arrow on the omni
selector to reach a new box.
• Press the
left or right arrow on the omni
selector to select a new setting.
4. Press the MENU/ENTER key to save the changes or
press the C key to close the window without saving
any new settings.
Information regarding image settings
Auto adjust
Sets the function of the A key. There are three options:
Level and range, Level, Range.
- Level and range
The camera will automatically adjust the level (bright-
ness) and span (contrast) of the image to the optimum
setting.
- Level
The camera will automatically adjust the level
(brightness) of the image.
- Range
The camera will automatically adjust the span (contrast)
of the image.
Continuous adj
Determines whether the brightness and contrast are
adjusted automatically on the monitor while the user
is operating the camera.
- Level and span
The brightness and contrast are adjusted automatically.
- Level
The camera will automatically adjust the level
(brightness) of the image.
- None
The brightness and contrast will not be adjusted auto-
matically.
Measurement Range
The brightness can be reduced by using the integra-
ted filter or an additional filter lens (optional only for
high temperature cameras).
1. Press the MENU/ENTER key.
2. Press up
s
and down
t
arrow on the omni
selector to select [Ma-
nual adj.], then press
the MENU/ENTER key.