Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 35 / 163

General Information
35
Traction Control (TC) Disabled
Warning Light
The TC disabled warning light
should not illuminate unless traction
control is switched off or there is a
malfunction.
If the warning light becomes illuminated
at any other time while riding, it
indicates that the traction control
system has a malfunction that requires
investigation.
Tyre Pressure Warning Light
(TPMS) (if fitted)
Warning
Stop the motorcycle if the tyre
pressure warning light illuminates.
Do not ride the motorcycle until the
tyres have been checked and the tyre
pressures are at their recommended
pressure when cold.
The tyre pressure warning
light works in conjunction with the Tyre
Pressure Monitoring System (TPMS) (if
fitted).
The warning light will only illuminate
when the front or rear tyre pressure is
below the recommended pressure. It will
not illuminate if the tyre is over inflated.
When the warning light is illuminated,
the TPMS symbol indicating which is the
deflated tyre and its pressure will
automatically be shown in the display
area.
o7:29
12.5
1
9999 02:25
8
6
4
2 0
14
25.2
F
E
TRIP
mi mp/h HH:MM
PM
C
mph
8
6
4
2 0
14
RPM
x1000
10
5
12
36
PSI
F R
18
PSI
3
1
2 4 5
1. Mode button
2. Joystick control
3. TPMS symbol
4. Front tyre indicator
5. Rear tyre indicator
The tyre pressure at which the warning
light
illuminates is temperature
compensated to 20°C but the numeric
pressure display associated with it is
not, see page
124. Even if the numeric
display seems at or close to the
standard tyre pressure when the
warning light is on, a low tyre pressure
is indicated and a puncture is the most
likely cause.
Hazard Warning Lights
To turn the hazard warning lights on or
off, press and release the hazard
warning light switch.
The ignition must be switched ON for
the hazard warning lights to function.
The hazard warning lights will remain on
if the ignition is switched off, until the
hazard warning light switch is pressed
again.