Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 102 / 163

Maintenance
102
Engine Oil Specification and Grade
(10W/40 & 10W/50)
Triumph's high performance fuel
injected engines are designed to use
10W/40 or 10W/50 semi or fully
synthetic motorcycle engine oil that
meets specification API SH (or higher)
and JASO MA, such as Castrol Power 1
Racing 4T 10W-40 (fully synthetic)
engine oil, sold as Castrol Power RS
Racing 4T 10W-40 (fully synthetic) in
some countries.
Refer to the chart below for the correct
oil viscosity (10W/40 or 10W/50) to be
used in your riding area.
-20 -10 0 10 20 30 40
-4 14 50 32 68 86 104
(°C)
(°F)
Ambient Temperature (°C)
Ambient Temperature (°F)
SAE 10W/50
SAE 10W/40
Oil Viscosity Temperature Range
Do not add any chemical additives to
the engine oil. The engine oil also
lubricates the clutch and any additives
could cause the clutch to slip.
Do not use mineral, vegetable, non-
detergent oil, castor based oils or any oil
not
conforming to the required
specification. The use of these oils may
cause instant, severe engine damage.
Make sure that no foreign matter enters
the crankcase during an engine oil
change or top up.
Cooling System
To ensure efficient engine cooling, check
the coolant level each day before riding
the motorcycle, and top up the coolant
if the level is low.
Note
A year round, Hybrid Organic Acid
Technology (known as Hybrid OAT or
HOAT) coolant is installed in the cooling
system when the motorcycle leaves the
factory. It is coloured green, contains a
50% solution of ethylene glycol based
antifreeze, and has a freezing point of
-35°C (-31°F).
Corrosion Inhibitors
Warning
HD4X Hybrid OAT coolant contains
corrosion inhibitors and antifreeze
suitable for aluminium engines and
radiators. Always use the coolant in
accordance with the instructions of
the manufacturer.
Coolant that contains anti-freeze and
corrosion inhibitors contains toxic
chemicals that are harmful to the
human body. Never swallow antifreeze
or any of the motorcycle coolant.