Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 136 / 163

Maintenance
136
Headlight Bulb Replacement
Caution
The use of non-approved bulbs may
result in damage to lenses and other
lighting unit components.
Use genuine Triumph supplied bulbs as
specified
in the Triumph Parts
Catalogue.
Always have replacement bulbs
installed by an authorised Triumph
dealer.
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulbs to cool before handling.
Avoid touching the glass part of the
bulb. If the glass is touched or gets
dirty, clean with alcohol before reuse.
Warning
Do not reconnect the battery until the
assembly process has been completed.
Premature battery reconnection could
result in ignition of the battery gases
causing risk of injury.
To replace the headlight bulb:
• Disconnect the battery, see
page 129.
• Remove the cockpit infill panels, see
page
69.
1
2
1. Headlight unit (left hand shown)
2. Bulb cover
• Turn the headlight bulb cover
anticlockwise and remove it from
the headlight.
• Disconnect the multiplug from the
bulb.
• Noting its orientation, detach the
bulb retainer from the hook on the
headlight assembly and rotate it
away from the bulb as shown.
2
1
3
1. Bulb
2. Bulb retainer
3. Bulb retainer hook
• Remove the bulb from the bulb
retainer.