Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 113 / 163

Maintenance
113
In accordance with the Scheduled
Maintenance chart, inspect the rear
brake pads for wear. If the lining
thickness of any rear brake pad
including the brake backing plate is less
than 4.5
mm then replace all the brake
pads on the wheel.
2
1
3
1. Brake backing plate
2. Brake pad lining
3. Chamfer
Note
An area of the friction material is
chamfered. Once the chamfer is worn
away, this indicates the minimum
thickness has been reached, and all the
brake pads on that wheel must be
replaced.
Disc Brake Fluid
Warning
Brake fluid is hygroscopic which
means it will absorb moisture from the
air.
Any absorbed moisture will greatly
reduce the boiling point of the brake
fluid causing a reduction in braking
efficiency.
Because of this, always replace brake
fluid in accordance with scheduled
maintenance requirements.
Always use new brake fluid from a
sealed container and never use fluid
from an unsealed container or from
one which has been previously
opened.
Do not mix different brands or grades
of brake fluid.
Check for fluid leakage around brake
fittings, seals and joints and also
check the brake hoses for splits,
deterioration and damage.
Always rectify any faults before riding.
Failure to observe and act upon any of
these items may cause a dangerous
riding condition leading to loss of
control and an accident.