Maintenance
111
•
Also inspect the sprockets for
unevenly or excessively worn or
damaged teeth.
ccol
Worn Tooth
(Engine Sprocket)
Worn Tooth
(Rear Sprocket)
(Sprocket wear exaggerated for
illustrative purposes)
•
If there is any irregularity, have the
drive chain and/or the sprockets
replaced by an authorised Triumph
dealer.
•
Refit the chain guard, tightening the
fixings to 9
Nm.
Brakes
Breaking-in New Brake Pads and
Discs
Warning
Brake pads must always be replaced
as a wheel set. At the front, where two
calipers are fitted on the same wheel,
replace all the brake pads in both
calipers.
Replacing individual pads will reduce
braking efficiency and may cause an
accident.
After replacement brake pads have
been fitted, ride with extreme caution
until the new pads have 'broken in'.
New brake discs and pads require a
period of careful breaking-in that will
optimise the performance and longevity
of
the
discs
and
pads.
The
recommended distance for breaking-in
new pads and discs is 200
miles
(300
km).
During this period, avoid extreme
braking, ride with caution and allow for
greater braking distances.
Summary of Contents for Daytona Moto2 765 2020
