Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 46 / 163

General Information
46
Caution
Stop the engine immediately if the
high coolant temperature warning
light illuminates. Do not restart the
engine until the fault has been
rectified.
Severe engine damage will result from
running the engine when the high
coolant temperature warning light is
illuminated.
Trip Meter
There are two trip meters that can be
accessed and reset in the information
tray.
1
9999 02:25 25.2
2
9999 04:45 42.5
mi HH:MM mph
mi HH:MM mph
To view a specific trip meter:
• Push the joystick left/right until the
required trip meter is shown.
Note
Trip 2 meter can be shown or hidden
from the information tray. For more
information, see page
53.
To reset a trip meter:
• Select the trip meter to be reset.
• Press and hold the joystick centre
for more than one second.
• The trip meter will then be reset.
The trip meter can also be reset from
the Main menu options, see page
52.
Fuel Status Information
The Fuel Status information tray shows
fuel consumption information.
59 42 12
MPG MPG RANGE
1 2
3 5
4
1. Fuel information light
2. Average fuel consumption
3. Instantaneous fuel consumption
4. Range to empty
5. Reset
To access the fuel status information,
push the joystick left/right to scroll
through the options until the fuel status
information tray is shown.
Fuel Information Light
This illuminates when the fuel level
warning light is activated.
Average Fuel Consumption
This is an indication of the average fuel
consumption. After being reset, the
display will show dashes until 0.1 miles/
km has been covered.
Instantaneous Fuel Consumption
This is an indication of the fuel
consumption at an instant in time. If the
motorcycle is stationary, --.- will be
shown in the display area.
Range to Empty
This is an indication of the predicted
distance that can be travelled on the
remaining fuel in the tank.
Reset
To reset the average fuel consumption,
press and hold the joystick centre.