Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 51 / 163

General Information
51
Bike Set Up - TSA (Shift Assist)
Triumph Shift Assist (TSA) triggers a
momentary engine torque change to
allow gears to engage, without closure
of the throttle or operation of the
clutch. This feature works for both up-
changes and down-changes of gear.
The clutch must be used for stopping
and pulling away.
TSA will not operate if the clutch is
applied or if an up-change is attempted
by mistake when in 6th gear.
It is necessary to use a positive pedal
force to make sure there is a smooth
gear change.
EXIT
BIKE SETUP
SERVICE
TC
INDICATORS
ENABLED
DISABLED
TSA (SHIFT ASSIST)
TSA (SHIFT ASSIST)
To enable or disable Triumph Shift
Assist:
• From the BIKE SETUP menu, push
the joystick down to select TSA
(SHIFT ASSIST) and press the
joystick to confirm.
• Push the joystick down/up to scroll
between ENABLED and DISABLED.
• Press the joystick centre to confirm
the required selection.
• The display will then return to the
BIKE SET UP menu.
For more information on Triumph Shift
Assist (TSA), see page
80.
Bike Set Up - Direction Indicators
The direction indicators can be set to
automatic or manual.
EXIT
BIKE SETUP
SERVICE
TC
INDICATORS
INDICATORS
MANUAL
AUTOMATIC TSA (SHIFT ASSIST)
To select the required direction
indicators mode:
• From the BIKE SET UP menu, push
the
joystick down to select
INDICATORS and press the joystick
centre to confirm.
• Push the joystick down/up to scroll
between AUTOMATIC and MANUAL.
– AUTOMATIC - The self-cancelling
function is on. The indicators will
activate for eight seconds plus
an additional 65 meters.
– MANUAL - The self-cancelling
function is off. The direction
indicators must be manually
cancelled using the direction
indicator switch.
• Press the joystick centre to confirm
the required selection.
• The display will then return to the
BIKE SET UP menu.
Bike Set Up - Traction Control (TC)
The Traction Control (TC) system can be
temporarily
disabled. The Traction
Control (TC) system cannot be
permanently disabled, it will be
automatically enabled when the ignition
is turned off and then on again.