Triumph Adler UTAX PF 780 Service Manual Download | Manualshive

Page: 9 / 139

background image

2. Precautions for Maintenance

WARNING

• Always remove the power plug from the wall outlet before starting machine disassembly. ................

• Always follow the procedures for maintenance described in the service manual and other related

brochures. ..........................................................................................................................................

• Under no circumstances attempt to bypass or disable safety features including safety mechanisms

and protective circuits. ........................................................................................................................

• Always use parts having the correct specifications. ............................................................................

• Always use the thermostat or thermal fuse specified in the service manual or other related brochure

when replacing them. Using a piece of wire, for example, could lead to fire or other serious acci-
dent. ...................................................................................................................................................

• When the service manual or other serious brochure specifies a distance or gap for installation of a

part, always use the correct scale and measure carefully. ..................................................................

• Always check that the copier is correctly connected to an outlet with a ground connection. ...............

• Check that the power cable covering is free of damage. Check that the power plug is dust-free. If it

is dirty, clean it to remove the risk of fire or electric shock. .................................................................

• Never attempt to disassemble the optical unit in machines using lasers. Leaking laser light may

damage eyesight. ...............................................................................................................................

• Handle the charger sections with care. They are charged to high potentials and may cause electric

shock if handled improperly. ...............................................................................................................

CAUTION

• Wear safe clothing. If wearing loose clothing or accessories such as ties, make sure they are safely

secured so they will not be caught in rotating sections. ......................................................................

• Use utmost caution when working on a powered machine. Keep away from chains and belts. ..........

• Handle the fixing section with care to avoid burns as it can be extremely hot. ..................................

• Check that the fixing unit thermistor, heat and press rollers are clean. Dirt on them can cause

abnormally high temperatures. ...........................................................................................................

«
...
7
8
9
10
11
...
»

Summary of Contents for UTAX PF 780












































































































































Reviews:

No comments

Related manuals for UTAX PF 780

Brand: Dakota Digital Pages: 38

Brand: Xerox Pages: 36

Brand: Manfrotto Pages: 2

Brand: Unisys Pages: 255

Brand: Xerox Pages: 199

Brand: Oki Pages: 100

Brand: Oki Pages: 2

Brand: Xerox Pages: 4

Brand: Oki Pages: 38

Brand: Oki Pages: 38

Brand: Oki Pages: 36

Brand: Oki Pages: 36

Brand: Manfrotto Pages: 2

Brand: Makita Pages: 64

Brand: Waycon Pages: 4

Brand: Unitech Pages: 2

Brand: Baicells Pages: 32

Brand: BAFANG Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands