Triumph Adler UTAX PF 780 Service Manual Download Page 75

Page: 75 / 139

3NL-2

1-4-16

1450

SM multi feed sensor
backup error
(side multi tray)

[45 ppm/55 ppm model]
When writing the data, read
and write data does not match
3 times in succession.
Deleting a block has failed
three times in a row.
Writing won’t complete in 200
ms after writing has com-
menced.

SM multi feed
sensor

1. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.
SM multi feed sensor and SM main
PWB (YC11)

2. If the wiring is disconnected, shorted or

grounded, replace the wiring.

3. Replace the SM multi feed sensor.

SM main PWB

Replace the PF main PWB (Refer to the
service manual for the paper feeder).

1710

Side multi tray incompatible
detection error

[30 ppm/35 ppm model]
The side multi tray has been
installed with a device to
which it is incompatible.

The side multi tray
is installed with a
device to which it is
incompatible.

Install the side multi-tray with the target
model.

1810

Side multi tray communica-
tion error

[45 ppm/55 ppm model]
A communication error from
side multi tray is detected 10
times in succession.

Side multi tray

Check the wiring connection status with the
main unit and, if necessary, try connecting it
again.

SM main PWB

1. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.
SM main PWB (YC1) and Engine PWB
(YC19)

2. If the wiring is disconnected, shorted or

grounded, replace the wiring.

3. Replace the SM main PWB (Refer to the

service manual for the paper feeder).

Engine PWB

Check the engine software and upgrade to
the latest, if necessary. Replace the engine
PWB (see page 1-5-80).

SM main PWB

Replace the SM main PWB (Refer to the
service manual for the paper feeder).

1910

Side multi tray EEPROM
error

[45 ppm/55 ppm model]
When writing the data, read
and write data does not match
3 times in succession.

SM main PWB
(EEPROM)

1. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.

2. Replace the SM main PWB (Refer to the

service manual for the paper feeder).

Code

Contents

Related parts

Check procedures/

corrective measures

Summary of Contents for UTAX PF 780












































































































































Search results

Summary of Contents for UTAX PF 780

Reviews:

Related manuals for UTAX PF 780

Brands by name

Popular brands

Triumph Adler UTAX PF 780, Service Manual

Search results

Summary of Contents for UTAX PF 780

Reviews:

Related manuals for UTAX PF 780

Brands by name

Popular brands