Triumph Adler UTAX PF 780, Service Manual

Page: 50 / 139

3NL-1
1-3-21
U034 5. Change the setting value using the /- or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
Figure 1-3-4
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value
which is changed adds also the value of [Small] each item and is pulled.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode for optimizing reading positions.
Table DP
Adjustment: Center line adjustment
1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
[LSU Out Left]
Item No. Description
Correct image Output
example 1
Output
example 2
Leading edge
registration
(20 ± 1.0 mm)
U034
U066 U071
Display Description
Setting
range
Initial
setting
Change in
value per step
MPT Paper feed from MP tray -3.0 to 3.0 0 0.1 mm
Cassette1 Paper feed from cassette 1 -3.0 to 3.0 0 0.1 mm
Cassette2 Paper feed from cassette 2 -3.0 to 3.0 0 0.1 mm
Cassette3 Paper feed from optional cassette 3 -3.0 to 3.0 0 0.1 mm
Cassette4 Paper feed from optional cassette 4 -3.0 to 3.0 0 0.1 mm
Cassette5 Paper feed from optional cassette 5 -3.0 to 3.0 0 0.1 mm
Cassette6 Paper feed from optional cassette 6 -3.0 to 3.0 0 0.1 mm
Cassette7 Paper feed from optional cassette 7 -3.0 to 3.0 0 0.1 mm
Duplex Duplex mode (second) -3.0 to 3.0 0 0.1 mm