Triumph Adler UTAX PF 780 Service Manual Download Page 76

Page: 76 / 139

3NL-2

1-4-17

2650

SM paper feed motor error
(side multi tray)

[45 ppm/55 ppm model]
After SM paper feed motor is
driven, the ready signal does
not turn to L within 2 s.

SM paper feed
motor

1. To check the feed unit operation, exe-

cute U247 SMT- Motor ON (see page 1-
3-147).

2. Check the paper feed roller and drive

gear can rotate or they are not unusually
loaded and, if necessary, replace.

3. Confirm that the wiring connector is

firmly connected and, if necessary,
connect the connector all the way in.
SM paper feed motor and SM main PWB
(YC5)

4. If the wiring is disconnected, shorted or

grounded, replace the wiring.

5. Replace the SM paper feed motor.

SM main PWB

Replace the SM main PWB (Refer to the
service manual for the paper feeder).

Code

Contents

Related parts

Check procedures/

corrective measures

Summary of Contents for UTAX PF 780












































































































































Search results

Summary of Contents for UTAX PF 780

Reviews:

Related manuals for UTAX PF 780

Brands by name

Popular brands

Triumph Adler UTAX PF 780, Service Manual

Search results

Summary of Contents for UTAX PF 780

Reviews:

Related manuals for UTAX PF 780

Brands by name

Popular brands