Triumph Adler DC 2218, Advanced Operation Manual, Page: 97 / 148

System Menu
3-17
Custom Paper Type
Printing onto prepunched paper, preprinted paper or letterhead in the one-sided mode and the
two-sided mode from the same paper source may cause displacement of hole positions or reverse
orientations on both sides in two-sided printing. Set
Match Print Direction
to match the
orientation in one-sided printing and two-sided printing.
Example: Paper is set as shown in the illustration.
Note
• Setting of
Match Print Direction
will decrease the speed of one-sided printing a little.
• With the setting of
Match Print Direction
, set the paper with the side for the first page
face-down as shown in illustration A . (If the optional finisher is installed, set the paper with the
side for the first page face-down as shown in illustration B .)
• If the optional finisher is installed, the stapling mode may cause incorrect orientation of printing
depending on the stapling position.
1 Display the
Machine default
screen. (See How to Display the Machine Default Screen on
page 3-12 .)
2
Press the
S
key or the
T
key to select
Special
P.type
.
3 Press the Enter key.
4
Press the
S
key or the
T
key to select
Match Print
Direction
or
Fast Mode
.
5 Press the Enter key.
6 Press the Reset key. The message display returns to the copier basic screen.
Setting One-sided printing Two-sided printing
Match Print
Direction
Fast Mode
A
B
Machine Default :
Specific P . Type
P. Type (Weight)
P. Type (2sided)
Fast Mode :
Specific Paper Type :
Match Print Direction
Fast Mode
*