Triumph Adler DC 2218, Advanced Operation Manual

Page: 106 / 148

System Menu
3-26
Machine Management Code Change
You can change the four-digit management code for security management.
Note
If you change the management code, be sure not to forget it. If you forget the management code,
contact you service representative.
The management code at the factory default setting is
1800
for the 18 ppm model and
2200
for the
22 ppm model.
1 Display the
Machine default
screen. (See How to Display the Machine Default Screen on
page 3-12 .)
2 Press the S key or the T key to select
MachineAdmin Code
and than press the Enter key.
3 Enter the new management code using the numeric
keys, and than press the
Enter key.
4
Press the Reset key.
The message display returns to the copier basic screen.
Multi Purpose Tray Settings
Set the following items for feeding paper from the multi-purpose tray.
Paper Size
Set the size of paper to be used from the multi-purpose tray. You can use irregular size paper by
inputting the size.
Note
If the paper size is unknown or no particular paper size setting is required, select
Universal
Size
.
Selecting a Size from Regular Sizes
Sizes that can be set:
Inch Specification — 11 × 17" (Ledger), 8
1/2
× 14" (Legal), 8
1/2
× 13" (Oficio II), 8
1/2
× 11" (Letter),
11 × 8
1/2
", 5
1/2
× 8
1/2
" (Statement), A4R, A4
Metric Specification — A3, B4, A4R, A4, B5R, B5, A5R, B6R, A6R, 8
1/2
× 11" (Letter), 11 × 8
1/2
",
Folio
1
Press the System Menu/Counter key.
2 Press the S key or the T key to select
MP Tray
setting
.
3 Press the Enter key.
Auto Clear Time
Silent Mode
Machine Default :
MachineAdminCode
Sec.
On :
: 1234
: 90
Machine Admin . Code Change :
1800
# keys
End
System Menu / Counter:
Language
MP Tray Setting