Triumph Adler DC 2218, Advanced Operation Manual

Page: 77 / 148

Printer Settings
2-51
Resource Protect Mode
The resource protect mode protects the resource data such as downloaded fonts and macros and
memorizes the PCL resources even if the emulation mode is switched. If you select
Permanent
,
temporary resources are not protected. If you select
Perm/Temp
, however, temporary resources
are also protected.
1 Display the
Others
screen. (See How to Display the Others Screen on page 2-49 .)
2 Press the S key or the T key to select
Resource
Prot
.
3 Press the Enter key.
4
Press the
S
key or the
T
key to select
Off
,
Permanent
or
Perm/Temp
.
5 Press the Enter key.
6 Press the Reset key. The message display returns to the printer basic screen.
Auto Continue
If any of the following error messages appears, the error can be cleared and printing can be
continued after the preset recovery time elapses (auto continue).
•
Memory Overflow/Press GO
•
Print overrun Press GO
•
KPDL error Press GO
•
File not found Press GO
•
HARD DISK error Press GO
•
RAM disk error Press GO
•
MemoryCard err Press GO
•
Illegal Account Press GO
•
Exceeded Max.out Press GO
•
Account error Press Go
•
Duplex disabled Press GO
•
Add Staples and Press GO
•
e-MPS not stored Press GO
•
Opt. ROM error Press GO
Also you can set the time that elapses before auto continue is activated.
1 Display the
Others
screen. (See How to Display the Others Screen on page 2-49 .)
2 Press the S key or the T key to select
Auto
Continue
.
Resource Prot .
Others
Print HEX-DUMP
Printer Reset
Back
Off
Resource Prot .
Permanent
Auto Continue
Resource Prot .
Others
Printer Reset