Triumph Adler CLP 4630 Page 39 Instruction Handbook Manual Download

Page: 39 / 138

Using the Operation Panel

2-15

Print Fonts List

To help you decide in selecting a font, you can printout lists of the internal
fonts or the optional fonts.

Press

while

Report Print >

is displayed.

Press

repeatedly until

>Print Fonts List

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again. The message

Processing

appears and the

printer prints a list of fonts with a sample and font ID (number) for
each of them.

Print Hard Disk File List

This allows you to print a list of the files on the hard disk.

This menu is displayed only when the optional hard disk is installed on the
printer.

IMPORTANT

This is only displayed when the printer has a hard disk

installed and the disk is correctly formatted.

Press

while

Report Print >

is displayed.

Press

repeatedly until

>Print Hard Disk File List

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again. The message

Processing

appears and the

printer prints a list of files stored in a hard disk.

Print RAM Disk File List

This allows you to print a list of the files on the RAM disk.

IMPORTANT

This is displayed when RAM disk mode is enabled.

Press

while

Report Print >

is displayed.

Press

repeatedly until

>Print RAM Disk File List

appears.

Press

[OK]

. A question mark (

) appears.

Press

[OK]

again. The message

Processing

appears and the

printer prints a list of files stored in a RAM disk.

>Print
Fonts List ?

>Print Hard Disk
File List ?

>Print RAM Disk
File List ?

Summary of Contents for CLP 4630











































































































































Search results

Summary of Contents for CLP 4630

Reviews:

Related manuals for CLP 4630

Brands by name

Popular brands

Triumph Adler CLP 4630, Instruction Handbook Manual

Search results

Summary of Contents for CLP 4630

Reviews:

Related manuals for CLP 4630

Brands by name

Popular brands