Triumph Adler CLP 4630, Instruction Handbook Manual

Page: 59 / 138

Using the Operation Panel 2-35
Entering the Width and Length
Enter the paper size for
X Dimension
and
Y Dimension
as shown in
the figure.
1
When the unit of measurement is set, press V .
>>X Dimension
appears (the paper width setting).
2
Press [OK] . A blinking cursor ( _ ) appears.
3
Press U or V to increase or decrease the value of the figure where
the cursor is blinking and display the desired width.
Acceptable paper widths are as follows:
• Cassette : 105 to 216 mm
• Paper Feeder PF-500/PF-510 (optional) : 92 to 216 mm
4
Display the paper width and press [OK] .
5
When the width is set, press V .
>>Y Dimension
appears (the paper
length setting). Set the desired length in the same way as the width.
Acceptable paper lengths are as follows:
• Cassette : 148 to 356 mm
• Paper Feeder PF-500/PF-510 (optional) : 162 to 356 mm
6
Display the paper length, press [OK] .
7
Press [MENU] . The display returns to
Ready
.
X Dimension
Y D
imension
105 to 216 mm
(4.13 to 8.5 inches)
148 to 356 mm
(5.83 to 1
4.02 inches)
>>X Dimension
216 mm