manualshive.com logo in svg

Triumph Adler CLP 4630, Instruction Handbook Manual, Page: 108 / 138

Share
Download
Triumph Adler CLP 4630 Instruction Handbook Manual Download Page 108

2-84

Using the Operation Panel 

Adjust/Maintenance (Adjust/Maintenance 
selection/setting)

Adjust/Maintenance is used to adjust the print quality and to carry out 
printer maintenance. 

The options available in Adjust/Maintenance are as follows:

• Color Calibration
• Registration Normal (Color registration [standard])
• Registration Details (Color registration [detailed])
• Restart Printer
• Service (for maintenance)

IMPORTANT  

Service

 is primarily a menu used by service personnel 

for maintenance work. There is no need for customers to use this 
menu.

1

Press 

[MENU]

.

2

Press 

U

 or 

V

 repeatedly until 

Adjust/Maintenance >

 appears.

Color Calibration

This printer contains a calibration function that automatically makes 
adjustments to compensate for changes that occur over time due to 
variations in the ambient temperature and humidity. So that the highest 
quality color printing can be maintained, this color calibration operation is 
carried out automatically each time the power to the printer is turned on. 
The color calibration operation may be carried out automatically during 
recovery from the Auto Sleep or during printing.

1

Press 

Z

 while 

Adjust/Maintenance >

 is displayed.

2

Press 

U

 or 

V

 repeatedly until 

>Color Calibration

 appears.

3

Press

 [OK]

. A question mark (

?

) appears.

4

Press

 [OK]

 again. The message display shows 

Please wait 

(Calibrating)

 and calibration will start. 

5

When calibration is finished, the display returns to 

Ready

.

Adjust/        >
Maintenance

>Color
 Calibration ?

Summary of Contents for CLP 4630











































































































































Reviews:

No comments