Triumph Adler CLP 4630, Instruction Handbook Manual

Page: 102 / 138

2-78 Using the Operation Panel
Maximum Output (Maximum print output setting [color +
monochrome total])
Limits the number of pages for all printing on the currently selected
account.
1
Set the account ID and then press
U
or
V
repeatedly until
>>Maximum Output
appears.
2
Press [OK] . The message display shows a blinking cursor (
_
).
3
Press U or V to increase or decrease, respectively, the value at the
blinking cursor. Set the desired number of pages. You can set a
number between
0000001
and
9999999
as the number of pages.
Use Y and Z to move the cursor right and left.
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
Color Max.out (Maximum print output setting [color])
Limits the number of pages for color printing on the currently selected
account.
1
Set the account ID and then press U or V repeatedly until
>>Color
Max.out
appears.
2
Press [OK] . The message display shows a blinking cursor (
_
).
3
Press
U
or
V
to increase or decrease, respectively, the value at the
blinking cursor. Set the desired number of pages. You can set a
number between
0000001
and
9999999
as the number of pages.
Use
Y
and
Z
to move the cursor right and left.
4
Press [OK] .
5
Press [MENU] . The display returns to
Ready
.
Reset Counter (Counter reset)
Resets the counter (pages used) for the currently selected account.
1
Set the account ID and then press U or V repeatedly until
>>Reset
Counter
appears.
2
Press [OK] . A blinking question mark (
?
) appears.
3
Press [OK] again. The counter is reset.
4
Press [MENU] . The display returns to
Ready
.
>>Maximum Output
0000001
>>Color Max.out
0000001
>>Reset Counter?