Triumph Adler CLP 4630, Instruction Handbook Manual, Page: 61 / 138

Using the Operation Panel 2-37
Type Adjust (Creating custom paper type)
The following describes the procedure used to set a user-defined paper
type for the printer. Eight custom user settings may be registered. After
having been set, any of these may be called up when setting the paper
type for a paper source.
The paper weight and duplex path can be set (refer to Paper Weight
(Setting the paper weight) on page 2-38 , and Duplex Path (Setting the
duplex path) on page 2-38 ) after selecting the paper type to be
customized as follows. For how to reset the customized settings, refer to
Reset Type Adjust (Resetting the custom paper type) on page 2-38 .
1
Press
Z
while
Paper Settings >
is displayed.
2
Press U or V repeatedly until
>Type Adjust >
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press U or V to display the desired paper type. The display changes
as shown below.
PLAIN
TRANSPARENCY
PREPRINTED
LABELS
BOND
RECYCLED
VELLUM
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
ENVELOPE
CARDSTOCK
COATED
THICK
HIGH QUALITY
CUSTOM 1
(to
8
)
5
Press [OK] .
6
Press Z and proceed to the next step Paper Weight (Setting the
paper weight) .
>Type Adjust >
? PLAIN