Tripp Lite NetDirector B022-U08-IP Owner'S Manual Download Page 7

Page: 7 / 59

6 5

Standard Rack Mounting

1. Depending on whether you want to mount the KVM switch to the front or back of the rack, attach the included rackmount brackets to the front or

rear sides of the KVM switch.

2. Using user-supplied screws, mount the rackmount brackets of the KVM switch to the rack.

5.2 Rack Mounting Instructions

5.3 Grounding

5. Installation

(continued)

To prevent damage to your installation, it is important that all devices

are properly grounded. Using a user-supplied grounding wire, ground
the KVM switch by connecting one end of the wire to the grounding

terminal on the unit, and the other end of the wire to a suitably
grounded object.

5.4 Single Stage Installation

In a single stage installation, there are no additional KVM switches
daisy-chained from the master KVM. To set up a single stage

installation, refer to the following steps and installation diagram.

Power OFF all computers that are being connected to the KVM

switch.

Add an external console to the KVM by connecting the included

USB/PS2 console cable kit to the console port on the back of the

unit, and then connecting an external monitor (HD15), keyboard

(USB or PS/2) and mouse (USB or PS/2) to the connectors on the
cable kit.

Connect a P778-Series USB/PS2 Combo KVM Cable Kit between
an available KVM port on the back of the unit and a computer/
server. P778-Series Cable Kits allow you to connect to a computer

with either USB or PS/2* keyboard/mouse ports, without the need
for separate cables.

Note: The distance between the KVM and the

connected computer must not exceed 33 ft. (10 m).

Repeat step 3 for each additional computer you wish to connect.

Connect the LAN port on the back of the unit to the network using

Cat5e/6 cabling.

Connect the included external power supply to the B022-U08-
IP, and then plug it into a Tripp Lite Surge Suppressor, PDU or

Uninterruptible Power Supply (UPS).

After the KVM switch powers up, power ON the connected

computers.

*When connecting to computers using the PS/2 connectors of a P778-Series Cable Kit, the

Mouse Sync Mode

setting must be set to

Manual

in order to access the computer over IP.

Mouse Sync Mode

is set to

Automatic

, you will not have mouse functionality when

accessing that computer over IP. This setting is set to

Manual

by default.

Summary of Contents for NetDirector B022-U08-IP




























































Search results

Summary of Contents for NetDirector B022-U08-IP

Reviews:

Related manuals for NetDirector B022-U08-IP

Brands by name

Popular brands

Tripp Lite NetDirector B022-U08-IP, Owner'S Manual

Search results

Summary of Contents for NetDirector B022-U08-IP

Reviews:

Related manuals for NetDirector B022-U08-IP

Brands by name

Popular brands