7.4.5
SESSION SETTINGS -> REMOTE CONTROLLERS
Scroll down to the bottom of the page to define the mapping of functions to an Avid EUCON or ICON controller.
There are four different sets of mappings which are accessed using the tabs at the top of the area:
Speaker sets
,
Monitor
Sources
,
Cue Sources
and
Cue Outputs
:
In each case, click to assign a D-Mon processor resource (e.g. a speaker set) to the controller function (e.g.
Main Speaker
):
The external controller functions are pre-determined by the connection protocol (either Avid EUCON or ICON). The available
resources depend on the D-Mon processor configuration; in our example above, two speaker sets have been defined (in the
) and, therefore, either of these can be assigned to the function
Main Speaker
.
Remember that all the SESSION SETTINGS parameters are stored and recalled in snapshots. This allows you to create different
mappings for different users or controllers.
For more details on connecting the external control surface, see Chapter 8
