7.4
SESSION SETTINGS
This page defines parameters which apply to the session. It is divided into four separate areas which can be accessed by
scrolling up and down the page:
•
Sources, Mix Buses & Outputs
(shown below) – define the resources available for the session.
•
Options
– for the monitoring such as “phones source follow monitor” and “auto-dim on talkback.”
•
Dynamic Range Simulation
– defines parameters for the Dynamic Range simulation (
DRC
button).
•
Remote Controllers
– defines the mapping functions to an external controller.
7.4.1
SAVING SETTINGS (IN SNAPSHOTS & PRESETS)
All parameters in the
SESSION SETTINGS
page are saved in both snapshots and presets.
7.4.2
SESSION SETTINGS -> SOURCES, MIX BUSES & OUTPUTS
At the top of the page, you will see all the SOURCES, MIX BUSES and OUTPUTS which are available for the session. These affect
the resources on the
CONTROLLER
page,
SESSION ROUTING
matrix and
MONITORING MIXER
.
The operation of this area are covered in the Quick Start chapter, so please see
5.9: Editing the Session Settings
for details.
Scroll up/down to
view all parameters
