6
INSTALLATION & SETUP
This chapter covers the
installation and setup
of the system.
Here we will focus on a stand-alone installation to be controlled via the D-Mon Control Panel GUI. If you wish to connect an
external control surface, then please see Chapter 8
for additional information.
ATTENTION!
You should read and observe
ALL
of the Important Safety Instructions
BEFORE
installing or operating your system.
Installation Checklist
To install and setup the device, you will need to:
•
Unpack and check the contents of the shipping box.
•
Start up the processor and configure its network connection.
•
Connect the audio devices & other wiring (Wordclock, GPIOs, etc.)
•
Configure the system – create and calibrate the speaker sets, define the audio clock, etc.
Further Information
Additional installation and wiring diagrams can be found in the Appendices, see
