Trinity Highway QuadGuard M Wide, Product Description Assembly Manual

Page: 4 / 64

TrinityHighway.com 3 Revision D March 2021
Customer Service Contacts
Trinity Highway is committed to the highest level of customer service. Feedback regarding the
QuadGuard
® M Wide, its assembly procedures, supporting documentation, and performance is
always welcome. Additional information can be obtained from the contact information below:
Trinity Highway
Telephone
(888) 323-6374 (USA)
+1 312 467-6750 (International)
Contact Link TrinityHighway.com/Contact
Important Introductory Notes
Proper assembly of the QuadGuard ® M Wide is critical to achieve performance. The QuadGuard ®
M Wide has been deemed eligible by the FHWA per MASH criteria. These instructions should be
read in their entirety and understood before assembling the QuadGuard ® M Wide. These
instructions are to be used in conjunction with the assembly of QuadGuard ® M Wide and are for
standard assemblies only as specified by the applicable highway authority. If you need additional
information, or have questions about the QuadGuard
® M Wide, please contact the highway
authority that has planned and specified this assembly and, if needed, contact Trinity Highway’s
Customer Service Department. This product must be assembled in the location specified by the
appropriate highway authority. If there are deviations, alterations, or departures from the
assembly protocol specified in this manual, the device may not perform as tested.
Important:
DO NOT use any component part that has not been specifically
specified herein for the QuadGuard ® M Wide during the assembly or repair of this
system (pp. 7 – 11 / 40 - 41).
This product has been specified for use by the appropriate highway authority and has been
provided to that user who has unique knowledge of how this system is to be assembled. No
person should be permitted to assist in the assembly, maintenance, or repair of this system that
does not possess the unique knowledge described herein. These instructions are intended for
an individual qualified to both read and accurately interpret them as written. These instructions
are intended only for an individual experienced and skilled in the assembly of highway products
that are specified and selected by the highway authority.
A Manufacturer’s Drawing Package will be supplied by Trinity Highway upon request. Each
system will be supplied with a specific drawing package unique to that system. Such drawings
take precedence over information in this manual and shall be studied thoroughly by a qualified
individual who is skilled in interpreting them before the start of any product assembly.