Trinity Highway QuadGuard M Wide, Product Description Assembly Manual

Page: 37 / 64

TrinityHighway.com 36 Revision D March 2021
QuadGuard ® M Wide Final Inspection Checklist
Site Location: ___________________________
Date: __________________________________
Inspector:
_________________________________
Refer to the QuadGuard
®
M Wide manual and / or drawing package.
Clearance of 30” behind rear Fender Panels for stroke (p. 15)
Anchor nuts are torqued to manufacturer specification (p. 17)
Cartridges are level and the same height in each Bay (p. 20)
Correct Cartridge is placed in each Bay and pointing to front of system
(p. 20)
Every hole and slot in Backup and Monorail is anchored (pp. 23, 24)
If no transition, side panels at backup are required (p. 25)
Anchor stud(s) are 1.5” maximum above the pad) (p. 24)
Monorail guides are attached to Diaphragms (p. 26)
Diaphragm Shims installed between Diaphragm & Monorail guides (p. 26)
Each Fender Panel has a tension Die Spring (p. 28)
Mushroom Washers seated in slots (p. 29)
Monorail has End Cap attached (p. 30)
Front of the Nose assembly is 32 1/8” above concrete pad (p. 34)
Nose Cartridge is at the same height as Bay Cartridges (p. 34)
Cartridge Hold Down Bracket is secure and engaged with Nose Cartridge
(p. 34)
Fender Panel gap is maximum of 1 .00” [25 mm] (p. 35)
Bolts and nuts are properly tightened (p. 35)
System is clear of debris