Mentor XL
8.1.1
Setup – GPI Control
Setup: Configure GPI Control
Configure GPI in
input 1
Response
DeAssign trigger
Force Freerun
Force Genlock
Force Ext. 10MHz
Step SDI 1 Test Patts.
Step SDI 2 Test Patts.
Step SDI 3 Test Patts.
Step through memories 1...4
Trigger
Rising Edge
Falling Edge
Active High
Active Low
input 2
as input 1
Configure GPI out
output 1
|
Genlock Input Loss
Ext 10MHz i/p loss
Line lock error
Field lock error
SC lock error
Illegal i/p ScH
Diagnostic alert
Locked to Genlock
Freerunning
Clear
output 2
as output 1
The charts above show:
•
Configure GPI in
: the actions which the Mentor XL will carry out when a control signal is applied
to GPI input 1 or 2.
•
Configure GPI out
: the events which will trigger the Mentor XL GPI outputs. The available output
conditions include error and status indications.
For connector wiring, see section 2.6.
Page 44 of 84
Trilogy Communications
