Mentor XL
2.7
AES
The chassis is fitted with a fixed D9 socket.
Pin
Description
1
AES 1 +
2
AES 1 -
3
Shield
4
n/c
5
0V GND
6
Shield
7
AES 2 +
8
AES 2 -
9
Shield
A parallel, unbalanced output for each AES signal may be provided on rear panel BNC connectors as
an option.
2.8
LTC
The chassis is fitted with a fixed D9 socket.
Pin
Description
1
LTC 1 +
2
LTC 1 -
3
Shield
4
n/c
5
0V GND
6
Shield
7
LTC 2 +
8
LTC 2 -
9
Shield
2.9
E
THERNET
The Mentor XL is equipped with a 10/100 Base-T Ethernet port. This port may be configured for
either dynamic (DHCP) address mode, or static address mode. These options are located in the Setup
menu. The Mentor XL should be connected to the network in the same way as any other networked
device (e.g. computer or laptop) using a 1:1 CAT 5 RJ45 cable (not provided).
If connected directly to a computer or laptop, either a crossover or straight through style Ethernet
cable may be used.
Page 15 of 84
Trilogy Communications
