Mentor XL
10.1
H
ARDWARE
O
PTIONS
The Mentor XL has three internal option slots. The suggested configuration for option boards is:
Slot 1
Either -
360-15-12 GPS receiver. See section 11.
Or
-- 360-15-02 Unbalanced AES Output card may be fitted.
Slot 2
360-20-00 which provides four additional HD or 3G SDI outputs in any combination. Requires
software feature 360-13-00 (HD) as pre-requisite.
Slot 3
360-16-01 Tri-level sync option board. See section 13.
The rear panel is engraved accordingly. Note:
•
Any option module
other than
the GPS receiver may be fitted to any slot but fitting any board to
slot 1 other than the GPS board or the 360-15-02 Unbalanced AES Output board, removes the
unbalanced AES output facility.
•
The GPS receiver must
only
be fitted to option slot 1.
•
Option boards are automatically recognised and the correct menus and web pages displayed.
10.2
S
OFTWARE
F
EATURES
If you wish to purchase any of the currently available features, please contact your usual Trilogy
sales representative with the following information:
•
The part number of the feature you require
•
The serial number of the Mentor XL which you wish to upgrade. Alternatively, if the serial
number is difficult to find, please supply the unit MAC address which may be read from the
Status >> Information menu
•
A valid e-mail address
You will receive by e-mail a unique unlock code for each Mentor XL. For multiple features on the
same Mentor XL, one code per Mentor XL will be provided.
10.2.1
Enabling additional Mentor XL features using Vector
Vector provides full control over all aspects of the Mentor XL. To enable a feature, log in to Vector
and navigate to
Admin >> Files
. Scroll down the page to the “Features” box and type in the 12
character code.
10.2.2
Enabling additional Mentor XL features via the front panel
Alternatively, enter the code directly on the front panel of the Mentor XL. This avoids the
requirement for any network connection or additional software. From the front panel menus,
navigate to
Setup >> More >> Upgrades >> Features
and enter the 12 character code using the
rotary control and <enter> key.
Page 50 of 84
Trilogy Communications
