Mentor XL
3.9
T
OP
L
EVEL
M
ENU
The top level menu currently holds these branches:
Home: Top Level
Digital Video
Analogue Video
Audio
Lock Mode
Setup
Status
Options
The content and features of each branch are explained briefly below: a more detailed view of each
section is provided in later sections of this manual. Note that the Options branch (above) is only
displayed if hardware option modules have been installed.
3.9.1
Digital Video
The SDI menu provides full control of the configuration of each of the three SDI outputs. The video
standard, timing and appearance of each output are controlled from this sequence of menus. In
addition, the embedded AES audio is enabled and configured for each output. If the high definition
(HD) option is activated, additional choices will appear on this menu. For more details, see section 4.
3.9.2
Analogue Video
The video menu controls the format of the five Analogue video signals provided on the Mentor XL.
These are arranged as a group of three plus a second group of two outputs. This allows, for example,
the group of three to be set as RGB or YUV in a single operation. See section 5.
3.9.3
Audio
The audio menu controls both non-embedded AES and Analogue audio outputs. For all outputs,
control of frequency and amplitude is available. In addition, for each AES output, the sample rate
and source ident may also be configured. See section 6.
3.9.4
Lock Mode
The genlock input menu sets the required format of the incoming video signal and defines the
behaviour of the Mentor XL when the genlock signal is applied, or removed. See section 7.
Page 20 of 84
Trilogy Communications
