Trilogy Mentor XL User Manual Download Page 8

Page: 8 / 84

Mentor XL

1.4

ECHNICAL

UPPORT

UK & International

Please contact Trilogy at the UK headquarters.

Trilogy Communications Ltd

26 Focus Way

Andover

Hampshire

SP10 5NY

United Kingdom

E-mail:

[email protected]

Tel: +44 (0)1264 384000

Trilogy USA Inc.

8201 Peters Road, Suite 1000

Fort Lauderdale, FL 33324

USA

Tel: (847) 461-1480

Toll Free Phone and Fax from US: 800-372-3198

In other regions please contact your local dealer. Current contact details may be found at

www.trilogycomms.com

then follow links to the Broadcast division site.

1.5

ARRANTY

Conditions of the warranty may vary according to your terms of purchase. Please consult your sales

documentation or if in doubt, contact your original supplier or Trilogy, quoting date of purchase and

unit serial number.

1.6

OMMON

ONFIGURATIONS

To cater for different system design philosophies and installations of varying complexity, we have

tried to make the Mentor XL as flexible as possible. Some common system modes and configurations

are described in section 16 on page 76.

Page 8 of 84

Trilogy Communications

Summary of Contents for Mentor XL





















































































Search results

Summary of Contents for Mentor XL

Reviews:

Related manuals for Mentor XL

Brands by name

Popular brands

Trilogy Mentor XL, User Manual

Search results

Summary of Contents for Mentor XL

Reviews:

Related manuals for Mentor XL

Brands by name

Popular brands