Mentor XL
11.4.2
DVITC mode
The factory default mode for DVITC is “Off”. DVITC is only available with standard definition SDI
outputs.
11.4.3
ATC sub-menu
The factory default mode for ATC is “Off”. ATC is available with both standard and high definition SDI
outputs.
DVITC Mode
Col Frame Flag
ATC
ATC Mode
< on / off >
Coding
LTC
VITC 1
VITC 2
Duplicate
< on / off >
Line
ATC Line < 6 - 22 >
•
ATC Coding:
•
ATC Duplicate
flag indicates, were the ATC data to be re-encoded as a VITC signal, whether it
would appear on 1 or 2 lines in each field.
•
ATC Line
: were the ATC data to be re-encoded as a VITC signal, it would appear on the line
number defined here.
11.4.4
On-screen timecode
The following SDI outputs are capable of displaying on-screen timecode:
•
Main unit
•
360-20-00 HD/3G SDI Expansion module
Once enabled, the on-screen timecode position may be set to each of the four corners of the screen
(top left, top right, bottom left or bottom right) using the “Position” menu. The hardware revision of
any fitted expansion modules may be checked from the Status menu: see section 9 for details.
Page 59 of 84
Trilogy Communications
