![Trilogy Mentor XL User Manual Download Page 73](http://html1.mh-extra.com/html/trilogy/mentor-xl/mentor-xl_user-manual_1162754073.webp)
Mentor XL
14.
OPTIONAL FEATURES: NTP AND SNMP
14.1
360-18-02
NTP
(N
ETWORK
T
IME
P
ROTOCOL
)
S
UPPORT
This is a software only optional feature: please contact your usual Trilogy sales representative for
details.
•
If enabled, the menu will offer “Server”, “Client” and “Disabled”: client and server are mutually
exclusive.
•
The client can sync to any Internet NTP server.
•
When acting as a server the Mentor XL should, ideally, be fitted with a GPS board but this is not
essential. Even if the server is free running, a client can still sync to it.
14.2
360-19-00
SNMP
(S
IMPLE
N
ETWORK
M
ANAGEMENT
P
ROTOCOL
)
S
UPPORT
SNMP is a component of the Internet Protocol Suite as defined by the Internet Engineering Task
Force (IETF). SNMP is used in network management systems to monitor network-attached devices
for conditions that warrant administrative attention.
The 360-19-00 software feature implements an SNMP agent on the Mentor XL, allowing events on
the Mentor XL to be monitored by a third-party management system.
The following conditions and events are reported:
State information is provided as per the Mentor XL error message screen:
•
DHCP server status
•
NTP server status
•
External 5 / 10MHz status
•
S318 presence
•
Line lock status
•
Subcarrier lock status
•
Genlock input status
•
Genlock ScH status
•
Genlock video standard status
•
Backup power supply status
GPS status reporting (if GPS option is fitted):
•
GPS status
•
GPS antenna status
•
GPS 1pps lock status
•
GPS: number of visible satellites
•
GPS: number of tracked satellites
The following SNMP relevant variables can be set:
•
If notification is enabled the Mentor XL will generate a trap on the change in value of any of the
state variables.
•
The IP address where notification traps are sent.
The GPI Outputs may also be controlled using SNMP:
•
When set to 'triggered' mode will force the GPO 1 state
•
When set to 'triggered' mode will force the GPO 2 state
Please contact your usual representative or Trilogy Support to request the SNMP MIB.
Page 73 of 84
Trilogy Communications