81
Model Three - Operation Manual
Tilt Parameters
The Tilt Parameter screen for Auto test is the same as the standard
Tilt Setup screen. All Tilt channels already selected for the User Plan
are enabled here.
You can use the
__
and
keys to highlight any channel in the
selected User Plan, then press the
F
1
F
1
(ENTER)
key to enable or
disable the channel for the Tilt test. An enabled channel displays a
check mark next to it and will be listed in the Tilt Channel boxes at the
bottom of the display. At least four of the 12 maximum number of Tilt
channels must be selected for Tilt to operate.
When the desired TILT channels have been selected, press the
F
3
(BACK)
key to return to the Auto test screen for
STEP 3
.
Hum Parameters
Use the
__
and
keys to highlight any of the analog channels
listed in the user plan.
Press the
F
1
F
1
(ENTER)
key to enable or disable any channels for the
Hum test.
