74
Model Three - Operation Manual
If Transmission has been turned off for absolute Spectrum measurements,
you can turn it on and press the
F
2
(NO)
key when asked to replace the
Zero Reference data.
The Model Three then prompts you to select the
F
1
F
1
key
to start a relative
Spectrum measurement with the old Zero Reference data.
Auto Test
The Model Three can accept user-defined testing programs to
automatically perform Level, Spectrum, Tilt (Favorite), Hum, QAM, and
Limit tests in specified time increments. The Model Three can store up to
seven user programs for recall when needed. The test results are stored to
a file automatically after measurement and they can be viewed or
uploaded to a PC later.
To run or set up an Auto test, press the
AUTO
AUTO
1 ABC
key. The Auto test program
directory appears.
To create a new Auto test, press the
key until a blank selection is
highlighted. If the directory has no programs, the blank selection appears
automatically.
