80
Model Three - Operation Manual
Limit Parameters
The status of all Limit test parameters are displayed. The enabled
limits for testing are also indicated by a check mark.
If the current settings are acceptable, you can press the
F
3
(BACK)
key to return to the Auto test screen for
STEP 3
.
If you wish to change or (disable) any Limit parameter, you can press
the
F
1
F
1
(ENTER)
key to display the Edit Limits screen. All Limit
parameters may be changed as described in Model Three Setup for
the Edit Limits display (see
Chapter 4: Setup, Measurement, Limit
Setup
). When the desired changes have been made in the Edit Limits
screen, select
SAVE AND EXIT
to return to the Auto Test Limit
Parameter screen.
If the settings displayed on the Limit Parameter screen are correct,
press the
F
3
(BACK)
key to return to the Auto test screen for
STEP 3
.
