43
Model Three - Operation Manual
Deleting a Channel:
A channel may be entirely deleted while in the
Edit User Plan list of channels by pressing the
key. If a channel
is deleted, it will not be available to enable later, and it will not be
scanned in the Full Spectrum Scan mode. It is recommended that a
channel be disabled instead of deleted from the plan.
When you have completed your changes to all channels that require
edit in the User Plan, press the
SET
SET
7 STU
key to save the modifications
and return to the main
SETUP
menu.
Tilt/Level List
This feature lets you select up to 12 favorite channels. These
channels are also used when making the Tilt measurement.
Press the
F
1
F
1
(ENTER)
key from the Tilt/Level List selection on the
CHANNEL PLAN SETUP
menu to enter the Tilt Setup screen.
To add a channel to the Favorites list, use the
F
2
and
F
3
keys
to
scroll the list of channels in the selected User Plan.
All edits are temporarily stored until you exit
the Edit User Plan screen. Do not turn off the
Model Three before exiting the Edit User Plan
screen, or the changes will not be saved.
You must select at least four channels to make
the Tilt measurement. The Model Three uses
the highest and lowest frequencies when
making the measurement.
