23
Model Three - Operation Manual
4.
Setup
Chapter 4
Overview
When you first press the
(POWER)
key, the Model Three briefly
displays the Start-Up screen, then displays the Level screen.
Before using the Model Three, you need to perform some setup procedures
from the following areas:
•
Information (general information about your Model Three and the
status of user settings)
•
General (backlight time, contrast, shutdown time, temperature
units, and date and time)
•
Measurement (signal level units, single frequency setup, limit
setup, transmission, voltage)
•
Channel plan (select, learn, and edit the user plan, channel
number display, tilt/favorite list)
The Model Three battery may need charging
prior to first use, see Chapter 3: Walkthrough,
Battery Charging.
Model Three ToolBox Software may also be
used to set up the Model Three. See the
Model Three ToolBox Operation Manual for
more information.
To enter the setup display, do the following:
1.
Press the
SET
SET
7 STU
key twice to display the main
SETUP
menu.
