50
Model Three - Operation Manual
Single Frequency Channels
You can use the Model Three to measure a Single Frequency level
over a specified bandwidth. To do this, first set the Model Three’s
channel type to
SIGL
or single frequency channel (see
Chapter 4:
Setup, Channel Plan, Edit User Plan
).
The level for the signal is displayed along with an
F
to indicate Single
Frequency mode. Also displayed are
ΔΔΔΔΔ
FREQ
and
ΔΔΔΔΔ
AMP
to indicate
the distance and amplitude difference between the center frequency
and the highest peak of the signal in the bandwidth.
To scan the channel spectrum, press the
LEVEL
LEVEL
4 JKL
key
again.
While in Level mode, you can use Fast Setup
to go directly to the setup parameters for the
current channel.
With a Single Frequency Channel, the Level
(Live, Max,
ΔΔΔΔΔ
p-p), Scale, Reference, Auto,
Marker,
ΔΔΔΔΔ
Marker, and Average may be used
as described for TV Channels.
