EASy IP EAS Network Receiver - Operation Manual
13
3.
Installation
!
3
Prerequisites
Equipment and Software Required to Install the EAS Network Receiver:
•
A computer running Microsoft Windows with an RS-232 port and HyperTerminal software is
required for initial configuration.
•
A PC running Microsoft Windows with a network connection is required for configuring the
Network Receiver for EAS operation. The network must be able to allow communication
between the Network Receivers, encoder/decoders, and the configuration computer as
follows:
•
10/100 Base-T Ethernet interface, one for every two radio/audio inputs.
•
Support outgoing UDP transmissions to encoder/decoders network.
•
Supports incoming TCP connection from encoder/decoders network.
•
Supports incoming TCP connection from configuration computer’s software.
•
A static IP must be assigned for each of the Ethernet connections required.
•
An appropriate location with a suitable antenna where monitored radio stations can be
received.
