EASy IP EAS Network Receiver - Operation Manual
31
Resetting/Rebooting Your Network Receiver
Note:
When changing the
IP Address
or
Configuration Port
field on
the
Configuration
tab, the
IP Address
and
Port Number
fields on the
System
tab should remain set to the old IP address and port number
until the
RESET Hardware
button has been selected.
To reset the Network Receiver, on the
System
tab, select the
RESET Hardware
button. A
status window should appear and disappear without reporting any errors. The Network
Receiver may take as long as sixty seconds to complete a reset cycle.
If the value of the
IP Address
and/or
Configuration Port
field was changed on the
Configuration
tab, update the
IP Address
and/or
Port Number
fields on the
System
tab
immediately after the successful reset.
Note:
Before resetting/rebooting the Network Receiver, you must
configure your Network Receiver communication settings for the desired
Network Receiver.
CAUTION:
Changes to any parameters located on the
Configuration
Tab do not take affect until you select the
RESET Hardware
Button
from the EAS Network Receiver Management Program or cycle the
power to your instrument.
