EASy IP EAS Network Receiver - Operation Manual
32
Importing and Exporting Your Network Receiver Configuration
Settings
To export the configuration settings of your Network Receiver system, on the
System
tab of the
software, select the
EXPORT Configuration
button, enter the desired name of the
configuration, and then select the
Save
button.
To import a configuration setting file that was previously exported, on the
System
tab of the
software, select the
IMPORT Configuration
button, select the desired configuration file, and
then select the
Open
button.
Upgrading Your Network Receiver Firmware
Perform the following steps to upgrade the firmware of your Network Receiver system:
1. On the
System
tab of the software, select
the
Upgrade Firmware
button. The “EAS
Network Receiver Upgrade Utility” screen
appears as shown in the graphic to the
right.
2. Select the
CONTINUE
button to program
the new firmware into your Network
Receiver or select the
CANCEL
button at
any time to exit without modifying your
Network Receiver firmware.
CAUTION:
Do not stop the upgrade process or turn off the EAS
Network Receiver until the upgrade is complete. This can cause the
firmware to be corrupted and may require that the unit be sent into the
factory to be restored.
CAUTION:
The upgrade process may damage configuration and logs.
Make sure to retrieve the configuration and logs before applying this
upgrade.
