EASy IP EAS Network Receiver - Operation Manual
39
Speaker Settings
Perform the following steps to verify the audio input channel settings for your Network
Receiver:
1. Select the down arrow next to the
Speaker Source
drop-down
box and then highlight the desired channel (
Channel 1
or
Channel 2
).
2. Adjust the front panel speaker volume by adjusting the slider up
or down.
3. Verify the audio settings by selecting the
Change Speaker
Source & Volume
button. The front panel speaker should
contain clear audio from the selected channel. Some EAS
specific audio sources may not contain audio until an EAS
message is activated.
4. Repeat this procedure for each audio input channel that has
been configured. After verifying the audio input channel
settings for you Network Receiver, set the
Speaker Source
drop-down box to
Internal
to mute the front panel speaker.
